$249.95 | | Make | Memphis Audio | | Model | 2-channel Car Amplifier - All | | Manufactuer ID | Mxa3002 | | MXA series amplifiers continues the MTX tradition of building high-quality products that meet the demands of the most discriminating audio enthusiasts. The versatile MXA3002 2-channel amplifier can perform multiple roles in your audio system. In 2-channel mode it delivers serious power to your high-quality full-range or component speakers. Switch the amplifier to single-channel operation and send 300 watts to your subwoofer. Thanks to its state-of-the-art power supply and heavy-duty heat sink you will enjoy clean and reliable power output. Built-in frequency filters tune the amps output to get the most out of your speakers. The variable bass boost circuit features a remote level control allows you to adjust the bass output right from the drivers seat. High- and low-level inputs allow you to connect this amp to any system. 2-channel car amplifier 75 watts RMS x 2 at 4 ohms 150 watts x 2 at 2 ohms 300 watts RMS x 1 bridged output at 4 ohms 4-ohm stable in bridged mode Variable high- and low-pass filters 40-350 Hz at 12 dB per octave Variable bass boost 0-18 dB at 40 Hz Remote bass level control Tri-way capable Tri-Way crossover required MOSFET power supply CEA-2006 compliant Speaker-level inputs with Smart Engage Auto Turn-on feature eliminates the need for a remote turn-on connection Fuse rating 20A x 2 4-gauge power and ground leads recommended wiring and hardware not included with amplifier 11-5/16 W x 2-5/8 H x 9-3/4 D 2-Channel amplifier Speaker-level input harness 4-pin Molex plug with attached 9 wires Remote subwoofer level control with attached 17.75 cable with right-angle 3.5mm male mini-plug on one end Subwoofer level control mounting bracket Self-adhesive label Knob for the Subwoofer Level Control 2 Self-tapping screws Large flat washer 2 Small flat washers 2 Lock washers Hex nut 4 wire tie Owners Manual English/Spanish/French/Germany Audio Performance Dyno Certificate MTX Audio Motorsports decal |
| |
|
 
$23.99 | | Make | Legacy Car Audio | | Model | Car Audio 1600 Watt 4-Gauge Amplifier Installation Kit | | Manufactuer ID | LAMP4 | | Product Features:20ft 4 Gauge Clear Red Power Wire 4ft 4 Gauge Clear Black Ground Wire 20ft 16 Gauge Blue Remote Turn-on 20ft 12 Gauge Speaker Wire 20ft Right Angle RCA Interconnect Audio Cable 6ft Black Split Loom Cable Conduit AGU Type 60A Gold Plated Fuse Water Resistant In-line Fuse Holder 2 Ring Terminals: 4 G 2 Spade Terminals: 4 G. Most Sound Enhancement products are available for in-store pickup from Advance Auto Parts. |
| |
|
 
$209.88 | | Make | Kenwood | | Model | 5 Channel Car Stereo Amplifier | | Manufactuer ID | KAC7005PS | |
| |
|
 
$149.88 | | Make | Kenwood | | Model | 4 Channel Car Stereo Amplifier | | Manufactuer ID | KAC-6406 | |
| |
|
 
$89.88 | | Make | Boss Audio | | Model | Phantom 4 Channel Car Stereo Amplifier | | Manufactuer ID | PF1800 | |
| |
|
 
$79.88 | | Make | Boss Audio | | Model | Phantom 2 Channel Car Stereo Amplifier | | Manufactuer ID | PT1000 | |
| |
|
$30.86 | | Make | AMERIC | | Model | Complete 6 Gauge Car Amplifier Wiring Installation Kit | | Manufactuer ID | POWERKIT3 | 800 watts / 6 gauge complete amplifier hookup kit 25ft. Rca interconnect audio cable 20ft. RedPower wire 6 gauge 4ft. Blue/purple ground wire 6 gauge 25ft. Ofc speaker cable 12 gauge 20ft. Blue remote turn on wire 16 gauge agu type water resistant inline fuse holder 6 gauge 60 amp gold plated agu fuse 1 gold ring terminal 6 gauge 6 ft. Split loom for cable protection and organization 6 gauge.
800 watts / 6 gauge complete amplifier hookup kit.
25ft. Rca interconnect audio cable.
4ft. Blue/purple ground wire 6 gauge.
20ft. Blue remote turn on wire 16 gauge.
Agu type water resistant inline fuse holder 6 gauge. |
| |
|
 
$76.14 | | Make | Boss | | Model | Black Car Amplifier Chaos Epic 1800Watt 4Channel | | Manufactuer ID | Cer4504 | Chaos Epic Series 4-Channel Class AB Car Amplifier.- RMS Power Rating - 4 ohms - 240 watts x 4 chan Bridged 4 ohms - 500 watts x 2 chan.
- Max power output - 1000 watts x 2 chan.
- Pulse Width Modulated MOSFET power supply
- Variable Bass Boost (0 to +18 dB bass boost at 50 Hz)
- Speaker-level (high-level) inputs with signal sensing for automatic turn-on
- 3-way protection circuitry (thermal overload and speaker short protection)
- Heavy duty aluminum alloy heat-sink
- Fixed high-pass filter (80 Hz)
- Soft turn-on circuit
- 4/3/2 or Mono channel operation
- Variable low-pass filter (35-160 Hz)
- 8 gauge power and ground wiring is required for installation.
- Wired remote bass level control included
- LED power (green) and protect (red) indicators
- Dimension - 16.37 x 11.25 x 2.43 in.
- 1-year Manufacturers Warranty.
|
| |
|
$99.95 | | Make | JVC | | Model | Car Amplifier 400 Watt 2 Channel | | Manufactuer ID | Ksax3202 | Jvc Ksax3202 Car Amplifier 400 Watt 2 Channel. Features- DRVN Series 2-Channel Class AB Car Amplifier
- Max power output - 400 watts x 1 chan.
- Pulse Width Modulated MOSFET power supply
- LED power (green) and protect (red) indicators
- Anti-pop circuitry
- 2 or Mono channel operation
- Speaker-level (high-level) inputs with signal sensing for automatic turn-on
- 4-way protection circuitry (thermal short circuit overload and DC offset protection)
- Heavy duty aluminum alloy heat-sink
- Input sensitivity -
- Level - 300mV-6V
- Fixed high-pass filter (150 Hz)
- Fixed low-pass filter (80 Hz).
|
| |
|
 
$179.95 | | Make | Jvc | | Model | Car Amplifier 800 Watt Mono Block | | Manufactuer ID | Ksax3201D | Jvc Ksax3201D Car Amplifier 800 Watt Mono Block. - Max. Power Output Of 800W
- Continuous Power Output - 250W X 1 At 4 Ohms 400W X 1 At 2 Ohms
- Class-D Circuit
- Mos-Fet Power Supply
- Mos-Fet Output Stage
- Frequency Response - 20 - 200Hz (-3Db)
- S/N - 60Dba At 2Vrms
- Thd - Less Than 0.08% At 4 Ohms 100Hz
- Lpf (50 - 200Hz -18Db/Oct)
- Subsonic Filter
- Variable Input Rca Level Control (0.2-5V)
- Variable Speaker Input Control (0.6 - 15V)
- Variable Bass Boost Control (45Hz 0 - 18Db)
- Nickel-Plated Rca Terminals
- Nickel-Plated Power Supply Terminals
- Nickel-Plated Speaker Out Terminals
- Protection Circuitry (Thermal/Short Circuit/Overload/Dc Offset)
- Anti-Pop Circuit
- Power On Indicator (Green)/Protector Indicator (Off).
|
| |
|
$138.60 | | Make | LANZAR | | Model | 4000 Watt 4 Channel Car Audio Amplifier Amp | | Manufactuer ID | DCT425 | Input Sensitivity: 100mV-6V.
Power Handling: 750W RMS x 4 @ 2-Ohms. 1000W Max x 4 @ 4-Ohms. 2000W Max x 2 [bridged] @ 4-Ohms.
THD 4 OhmPower 0.5%.
Frequency Response: 15Hz-40KHz.
Variable LPF: 50Hz~500Hz.
Stereo Separation: 65dB.
2 ohm Stereo Stable.
Tri-mode operation Bridgeable.
Power and Protection LED Indicators.
S/N Ratio (4 ohm ): 90dB.
Nickel-plated RCA connectors and Screw terminals.
Bass Boost: 0-18dB (60Hz fixed).
Thermal Over load and Speaker short protection.
Line In and Line Out.
Channels/Class: 4ch. Class A/B.
Soft Turn-on/Turn-off.
Variable HPF: 50Hz~500Hz.
Fuse Rating: 30Ax2.
Dimensions: 9.45(W) x 2.16(H) x 13.38(L). |
| |
|
 | Description | | | Auction [ Submit | Browse : Items | Location ] | | | Vendors |
| Message | Started by | Views | Last Post |
| | Products | |
| Photo Gallery |
 |  |  |  | Move the mouse to picture you wish to preview. |  |  |  |  |
| | Suggested | | | Keywords | |
|
Login | 
Register
Go Back
