WarmFlex is designed for fast and easy installation under floating or glued-down laminate, engineered wood and wood floors. WarmFlex is ideal for new construction or when remodeling to make any room in the house Coolerr and more comfortable. Use WarmFlex to heat or supplement any room, addition or basement. Installing a warm floor couldn't be easier. Select the WarmFlex mat sizes that best fit your floor space. Simply roll out WarmFlex mats on a suitable underlayment, lay the floor and connect to the thermostat and power. Follow separate instructions for glued floors. No step-down transformers, on-site splice connections or special tools are required.

• Add a power module to increase your heated area in increments up to 200 sq. ft. each
• Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
• Lead wires on only one end of the mat facilitate mat layout and installation
• Ultra-thin synthetic fabric shield limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment
• Installs over all laminate and engineered wood floor underlayments including synthetic cork, natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers
• Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
• Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
• Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
• WarmFlex 10 ft. x 36 in. 120V Floor heat Mat for floating laminate and wood floors; covers 30 sq. ft.
• Dimension - 120 x 36 x 0.2 in.
• Item Weight - 1.2 lbs.

WarmFlex is designed for fast and easy installation under floating or glued-down laminate, engineered wood and wood floors. WarmFlex is ideal for new construction or when remodeling to make any room in the house Coolerr and more comfortable. Use WarmFlex to heat or supplement any room, addition or basement. Installing a warm floor couldn't be easier. Select the WarmFlex mat sizes that best fit your floor space. Simply roll out WarmFlex mats on a suitable underlayment, lay the floor and connect to the thermostat and power. Follow separate instructions for glued floors. No step-down transformers, on-site splice connections or special tools are required.

• Add a power module to increase your heated area in increments up to 200 sq. ft. each
• Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
• Lead wires on only one end of the mat facilitate mat layout and installation
• Ultra-thin synthetic fabric shield limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment
• Installs over all laminate and engineered wood floor underlayments including synthetic cork, natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers
• Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
• Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
• Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
• WarmFlex 10 ft. x 18 in. 120V Floor Heat Mat for floating laminate and wood floors; covers 15 sq. ft.
• Dimension - 120 x 18 x 0.2 in.
• Item Weight - 0.9 lbs.

WarmFlex is designed for fast and easy installation under floating or glued-down laminate, engineered wood and wood floors. WarmFlex is ideal for new construction or when remodeling to make any room in the house Coolerr and more comfortable. Use WarmFlex to heat or supplement any room, addition or basement. Installing a warm floor couldn't be easier. Select the WarmFlex mat sizes that best fit your floor space. Simply roll out WarmFlex mats on a suitable underlayment, lay the floor and connect to the thermostat and power. Follow separate instructions for glued floors. No step-down transformers, on-site splice connections or special tools are required.

• Add a power module to increase your heated area in increments up to 200 sq. ft. each
• Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
• Lead wires on only one end of the mat facilitate mat layout and installation
• Ultra-thin synthetic fabric shield limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment
• Installs over all laminate and engineered wood floor underlayments including synthetic cork, natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers
• Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
• Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
• Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
• WarmFlex 10 ft. x 18 in. 240V Floor Heat Mat for floating laminate and wood floors; covers 15 sq. ft.
• Dimension - 120 x 18 x 0.2 in.
• Item Weight - 0.9 lbs.

WarmFlex is designed for fast and easy installation under floating or glued-down laminate, engineered wood and wood floors. WarmFlex is ideal for new construction or when remodeling to make any room in the house Coolerr and more comfortable. Use WarmFlex to heat or supplement any room, addition or basement. Installing a warm floor couldn't be easier. Select the WarmFlex mat sizes that best fit your floor space. Simply roll out WarmFlex mats on a suitable underlayment, lay the floor and connect to the thermostat and power. Follow separate instructions for glued floors. No step-down transformers, on-site splice connections or special tools are required.

• Add a power module to increase your heated area in increments up to 200 sq. ft. each
• Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
• Lead wires on only one end of the mat facilitate mat layout and installation
• Ultra-thin synthetic fabric shield limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment
• Installs over all laminate and engineered wood floor underlayments including synthetic cork, natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers
• Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
• Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
• Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
• WarmFlex 10 ft. x 36 in. 240V Floor heat Mat for floating laminate and wood floors; covers 30 sq. ft.
• Dimension - 120 x 36 x 0.2 in.
• Item Weight - 1.2 lbs.

WarmFlex is designed for fast and easy installation under floating or glued-down laminate, engineered wood and wood floors. WarmFlex is ideal for new construction or when remodeling to make any room in the house Coolerr and more comfortable. Use WarmFlex to heat or supplement any room, addition or basement. Installing a warm floor couldn't be easier. Select the WarmFlex mat sizes that best fit your floor space. Simply roll out WarmFlex mats on a suitable underlayment, lay the floor and connect to the thermostat and power. Follow separate instructions for glued floors. No step-down transformers, on-site splice connections or special tools are required.

• Add a power module to increase your heated area in increments up to 200 sq. ft. each
• Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
• Lead wires on only one end of the mat facilitate mat layout and installation
• Ultra-thin synthetic fabric shield limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment
• Installs over all laminate and engineered wood floor underlayments including synthetic cork, natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers
• Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
• Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
• Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
• WarmFlex 20 ft. x 18 in. 240V Floor Heat Mat for floating laminate and wood floors; covers 30 sq. ft.
• Dimension - 240 x 18 x 0.2 in.
• Item Weight - 1.2 lbs.

WarmFlex is designed for fast and easy installation under floating or glued-down laminate, engineered wood and wood floors. WarmFlex is ideal for new construction or when remodeling to make any room in the house Coolerr and more comfortable. Use WarmFlex to heat or supplement any room, addition or basement. Installing a warm floor couldn't be easier. Select the WarmFlex mat sizes that best fit your floor space. Simply roll out WarmFlex mats on a suitable underlayment, lay the floor and connect to the thermostat and power. Follow separate instructions for glued floors. No step-down transformers, on-site splice connections or special tools are required.

• Add a power module to increase your heated area in increments up to 200 sq. ft. each
• Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
• Lead wires on only one end of the mat facilitate mat layout and installation
• Ultra-thin synthetic fabric shield limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment
• Installs over all laminate and engineered wood floor underlayments including synthetic cork, natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers
• Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
• Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
• Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
• WarmFlex 20 ft. x 36 in. 240V Floor Heat Mat for floating laminate and wood floors; covers 60 sq. ft.
• Dimension - 240 x 36 x 0.2 in.
• Item Weight - 2 lbs.

WarmFlex is designed for fast and easy installation under floating or glued-down laminate, engineered wood and wood floors. WarmFlex is ideal for new construction or when remodeling to make any room in the house Coolerr and more comfortable. Use WarmFlex to heat or supplement any room, addition or basement. Installing a warm floor couldn't be easier. Select the WarmFlex mat sizes that best fit your floor space. Simply roll out WarmFlex mats on a suitable underlayment, lay the floor and connect to the thermostat and power. Follow separate instructions for glued floors. No step-down transformers, on-site splice connections or special tools are required.

• Add a power module to increase your heated area in increments up to 200 sq. ft. each
• Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
• Lead wires on only one end of the mat facilitate mat layout and installation
• Ultra-thin synthetic fabric shield limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment
• Installs over all laminate and engineered wood floor underlayments including synthetic cork, natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers
• Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
• Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
• Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
• WarmFlex 5 ft. x 36 in. 120V Floor Heat Mat for floating laminate and wood floors; covers 15 sq. ft.
• Dimension - 60 x 36 x 0.2 in.
• Item Weight - 0.9 lbs.

WarmFlex is designed for fast and easy installation under floating or glued-down laminate, engineered wood and wood floors. WarmFlex is ideal for new construction or when remodeling to make any room in the house Coolerr and more comfortable. Use WarmFlex to heat or supplement any room, addition or basement. Installing a warm floor couldn't be easier. Select the WarmFlex mat sizes that best fit your floor space. Simply roll out WarmFlex mats on a suitable underlayment, lay the floor and connect to the thermostat and power. Follow separate instructions for glued floors. No step-down transformers, on-site splice connections or special tools are required.

• Add a power module to increase your heated area in increments up to 200 sq. ft. each
• Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
• Lead wires on only one end of the mat facilitate mat layout and installation
• Ultra-thin synthetic fabric shield limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment
• Installs over all laminate and engineered wood floor underlayments including synthetic cork, natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers
• Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
• Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
• Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
• WarmFlex 5 ft. x 18 in. 120V Floor Heat Mat for floating laminate and wood floors; covers 7.5 sq. ft.
• Dimension - 60 x 18 x 0.2 in.
• Item Weight - 0.8 lbs.

WarmFlex is designed for fast and easy installation under floating or glued-down laminate, engineered wood and wood floors. WarmFlex is ideal for new construction or when remodeling to make any room in the house Coolerr and more comfortable. Use WarmFlex to heat or supplement any room, addition or basement. Installing a warm floor couldn't be easier. Select the WarmFlex mat sizes that best fit your floor space. Simply roll out WarmFlex mats on a suitable underlayment, lay the floor and connect to the thermostat and power. Follow separate instructions for glued floors. No step-down transformers, on-site splice connections or special tools are required.

• Add a power module to increase your heated area in increments up to 200 sq. ft. each
• Factory-attached, hermetically sealed lead wires connect to household 110/120 Voltage
• Lead wires on only one end of the mat facilitate mat layout and installation
• Ultra-thin synthetic fabric shield limits raising the floor height to the 1/8 in. to 3/16 in. thickness of the underlayment
• Installs over all laminate and engineered wood floor underlayments including synthetic cork, natural cork, polystyrene foam, polypropylene foam and compressed synthetic fibers
• Provides all the comfort and health advantages of radiant heating without fans, drafts, blowing pollutants or allergens
• Saves energy 25% to 35% compared to convective systems, using the programmable floor thermostat
• Manufacturer provided lifetime technical support when installed with manufacturer-provided thermostats specifically designed for radiant floor heating
• WarmFlex 5 ft. x 36 in. 240V Floor Heat Mat for floating laminate and wood floors; covers 15 sq. ft.
• Dimension - 60 x 36 x 0.2 in.
• Item Weight - 0.9 lbs.

An "all-in-one" programmable thermostat for all electric underfloor heating applications where optimal comfort temperature and minimum energy consumption is required. The thermostat can be configured for control of floor temperature room temperature or room temperature with floor temperature limit. In large applications exceeding 15 Amps the UDG thermostat can be extended by adding USG power modules at 15 Amps each. The thermostat is supplied with a factory-set 4-events-per-day-program for automatic comfort and set-back temperatures. The factory settings can be adjusted to suite your individual requirements. The programmable thermostat features an adaptive function allowing it to calculate when the heating must be switched on to ensure that the comfort temperature setting is reached at the required time. Programmed temperatures can be manually overridden at any time and the thermostat will automatically revert to the program temperature at the next scheduled event. The thermostat is supplied with a floor sensor that can be used for maximum temperature limit to comply with laminate and wood floor warranties.

• Simple user interface and thoughtful installation design
• Pre-programmed for quick set-up
• Monitors energy consumption for the last 2 days 30 days or 365 days
• Simple intuitive operation - no need for reference manual
• Dual Voltage: 120-Volt or 240-Volt
• Output relay: 15 Amp
• Large back-lit display for easy reading
• Class A GFCI with 5 mA trip level for wet room installation
• Includes 10 ft. floor temperature sensor
• UL Listed
• 7 Day Intuitive Programmable Thermostat with Floor Sensor for 120 or 240-Volt Floor Heating Systems
• Dimension - 6 x 3.38 x 2.63 in.
• Item Weight - 0.79 lbs.